ABB FPBA-01 Specifications download pdf (Page 15)

Options

Option / Frame A&B C&D E0&E G

Built-in C3 lter, earthed/unearthed network*

Built-in C3 lter, earthed network only*

External, plug-in C3 lter, earthed network only*

Built-in C2 lter, earthed network only*

External C2 lter, earthed network only*

1st environment vs 2nd environment

environment (category C1 & C2)

environment includes domestic premises. It also includes

establishments directly connected without intermediate

transformer to a low-voltage power supply network which

supplies buildings used for domestic purposes.

environment (category C3 & C4)

environment includes all establishments other than those

directly connected to a low-voltage power supply network

which supplies buildings used for domestic purposes.

EMC - Electromagnetic Compatibility

and modules

The electrical/electronic equipment must be able to operate

without problems within an electromagnetic environment.

This is called immunity. The ACS850 is designed to

have adequate immunity against interference from other

equipment. Likewise, the equipment must not disturb or

interfere with any other product or system within its locality.

This is called emission. Each ACS850 model can be equipped

with an built-in lter to reduce high frequency emission.

EMC standards

The EMC product standard (EN 61800-3 (2004)) covers

EMC standards

EN61800-3 (2004) product standard EN 55011, product family standard

for industrial, scientic and medical

(ISM) equipment

EN61000-6-4, generic emission

standard for industrial environments

EN61000-6-3, generic emission

standard for residential, commercial

and light-industrial environment

Category C1

environment)

Group 1

Class B

Not applicable Applicable

Category C2

environment)

Group 1

Class A

Applicable Not applicable

Category C3

environment)

Group 2

Class A

Not applicable Not applicable

Category C4

environment)

Not applicable Not applicable Not applicable

EMC lters

the specic EMC requirements stated for drives (tested with

motor and cable) within the EU.

EMC standards such as EN 55011, or EN 61000-6-3/4, are

applicable to industrial and domestic equipments and systems

including drive component inside. Drive units complying with

requirements of EN 61800-3 are compliant with comparable

categories in EN 55011 and EN 61000-6-3/4, but not

necessarily vice versa. EN 55011 and EN 61000-6-3/4 do not

specify cable length nor require a motor to be connected as

a load. The emission limits are comparable according to the

following table, EMC standards.

Selecting an EMC lter

The following table gives the correct lter selection.

* Max. cable length 100 m

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21

Comments to this Manuals

No comments

ABB FPBA-01 Specifications Page 15

Comments to this Manuals

Related products and manuals for Unknown ABB FPBA-01