ABB Welcome User Manual download pdf (Page 34)

Installation of the outdoor stations

Fig. 22

Fig. 23

For all outdoor stations an installation wall box of matching

colour is available for flush-mounting or surface-mounting.

Surface-mounting is suitable for all types of walls, whether

rendered, clinker or cavity wall. They are recommended

particularly for walls with a thermal sandwich system. Here

the use of suitable mounting material should be ensured.

Also flush-mounting is possible on the same wall types,

because the installation socket has a full perimeter frame.

For flush-mounting in a cavity wall (thickness between 2 and

25 mm) a cavity wall mounting set consisting of mounting

anchors is available.

To make plastering easy after a cavity has been cut into of

the wall for flush-mounted installation a mounting accessory

is available. This is inserted in the cavity and removed again

after plastering is completed. The flush-mounting box can

then be installed.

For dismantling the end strip, a distance of 1 cm should be

kept to the right of the outdoor station.

To be able to change the name plates while the outdoor

station is mounted, a distance of 10 cm should remain free

below the outdoor station. If this is not possible the outdoor

station must be removed from the installation socket to

change the name plates.

Note: The camera of the ABB-Welcome video outdoor station

should not face powerful light sources, such as street lights.

This should be taken into consideration when choosing the

correct position for mounting. Lamps in the entrance area

should uniformly illuminate the face of the visitor. The

recommended installation height is 1.50 m. This optimally

captures persons of average body size. Bright or backgrounds

with a deep contrast should be avoided. It could reduce the

quality of the picture.

Installation of indoor stations

The ABB-Welcome audio indoor station with handset and

the

ABB-WelcomeTouch are easy to install as a surface-

mounted device with the aid of the enclosed mounting frame.

The devices can also be mounted on a commercially available

58 flush-mounted wall box.

The ABB-Welcome audio indoor station with display can be

installed in the design of various switch programs and so

adapts to the other light switches and socket outlets in an

apartment. Two 58 flush-mounted wall boxes are required for

the installation.

Additional information is contained in the operating manuals.

The associated QR codes are listed starting from page 46.

Fig. 23Fig. 22

Detection angle of cameraThe distance zones for the installation of the

outdoor station

1 cm

10 cm

Distance zone

1.5 m

0.6 m

1.90 m

1.10 m

1.70 m

0.82 m

0.6 m

2.18 m

1.30 m

0.6 m

0.4 m

1.12 m

–

15°

34 Installation | User Manual ABB-Welcome

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 57 58

Comments to this Manuals

No comments

ABB Welcome User Manual Page 34

Comments to this Manuals

Related products and manuals for Door intercom systems ABB Welcome