ABB Tina 7A Service Manual Page 57

  • Download
  • Add to my manuals
  • Print
  • Page
    / 62
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 56
Designation Ordering Information Description
Vital 1 2TLJ020052R1000 Safety controller with 2 safety outputs, uses unique dynamic signal
technology, automatic or manual supervised reset, test input for moni-
toring of external positive guided relays/contactors, 5 LED indicators,
1 dual purpose information output, quick release terminal blocks, 22.5mm
wide, 24VDC supply. Meets safety category 4, dynamic self test.
Vital 2 2TLJ020070R4300 Safety controller with 2 independant input circuits, up to 10 devices
per circuit. 2 output groups. Group 2 can be set for time delay. LED
indication and three different modes of operation. 24VDC supply.
Meets safety category 4.
Vital 3 2TLJ020070R4400 Safety controller with 2 independant input circuits. Circuit 1 is for 2
channel devices, circuit 2 is for up to 10 dynamic devices. 2 output
groups. Group 2 can be set for time delay. LED indication and three
different modes of operation. 24VDC supply. Meets safety category 4.
Tina 1A 2TLJ020054R0000 Tina M12 dynamic port plug for Tina 4A/8A connection blocks. Must
be used to fill empty ports not used on connection blocks. Multi-function
status indicator LED.
Tina 2A 2TLJ020054R0100
Dynamic adapter for connecting potential free dry contact safety devices
to the Vital 1 controller or Pluto Safety PLC. M20 thread connection for
direct connection to the safety device or safety device enclosure, multi-
function status indicator LED, integrated information output 24VDC -
10mA. Comes with plastic locking nut.
Tina 2B 2TLJ020054R1100 Dynamic adapter for connecting potential free dry contact safety
devices to the Vital 1 controller or Pluto Safety PLC. Multi-function
status indicator LED, integrated information output 24VDC - 10mA.
For mounting inside of an enclosure.
Tina 3A 2TLJ020054R0200
Dynamic adapter with 5 pole M12 male quick disconnect for connecting
potential free dry contact safety devices to the Vital 1 controller or
Pluto Safety PLC. M20 thread connection for direct connection to the
safety device or safety device enclosure, multi-function status indicator
LEDs, integrated information output 24VDC - 10mA. Comes with plastic
locking nut.
Tina 3Aps 2TLJ020054R1400
Dynamic adapter with 5 pole M12 male quick disconnect for connecting
potential free dry contact safety devices to the Vital 1 controller or
Pluto Safety PLC. M20 thread connection for direct connection to the
safety device or safety device enclosure, multi-function status indicator
LEDs, integrated information output 24VDC - 10mA, 24VDC and 0VDC
power leads for powering up devices. Comes with plastic locking nut.
Tina 4A 2TLJ020054R0300
Dynamic 4 port connection block for connecting up to 4 safety devices
with dynamic signal. Ports are 5 pole M12 female quick disconnects.
Cable gland cover with internal terminal block for wiring 24VDC supply,
dynamic signal input/output from Vital 1 controller or Pluto Safety PLC
information outputs for each port, and summation output.
Component List - Vital/Tina
4:57
888-282-2123 www.jokabsafetyna.com
ABB JOKAB SAFETY
Page view 56
1 2 ... 52 53 54 55 56 57 58 59 60 61 62

Comments to this Manuals

No comments